Note with the drawing here which is the way Robert built these motors it is the opposite of what is shown in the patent drawing.

There are only 2 drive coils and 4 energy recovery coils.  This is correct and how the motors I saw in his workshop were made.
He does not show any switching on the ouput coils or energy collection coils but I believe that is very beneficial
 as it reduces the drag on the rotor dramatically and you get an almost totally inductive charge from your generator coils.

You may be looking for conventional electricity but this is a mistake,  there is far more power available as aetheric energy 
in these motors which is more like static electricity but can be converted to more normal dc by charging a capacitor with the 
output and then switching the to capacitor to either the load or a battery.  You may want to set up 2 caps and a flip flop 
arrangment so as to have a continous flow of power available.  

The power Robert was looking ofr was voltage but NO MEASUREABLE CURRENT. This is why it is different from normal electricity 
as normal meters wont measure this stuff correctly but is very powerful when you realise how to handle and use it correctly.

I hav included here an email from a guy who was a member of this group for a short time and only posted a couple of emails
then dissappeared.  Some critisised him but I knew when I read his email he was talking to same sort of power and ideas as 
Robert talked.  You need to read this article more than once as he has quite a bit of info in it.

RAM (Robert Adam's Motor); This is message 199 in this group messages section

So you say that there is no free energy?
So you say that all these inventors like Robert Adams are crackpots,
on drugs or hallucinating?
So you say you built one and it didn't produce more output than input?
So you say there is no such thing as perpetual machines?

So I say you are so wrong and I can prove it!

History:
I built many Adams motors and none of them worked. I didn't give up
thought. I knew I was doing something wrong but I didn't know what
exactly
Until, I read the writings one more time and this time, I paid
attention to what was being said.

Now what?
I finally got my sixth motor working and produced over 1200%
efficiency! It is actually running my home office! Take that you oil
companies! I finally found a way to screw you like you did me for
decades

So what is it that I was missing in seeing or doing?

Like the rest of you, I concentrated on speed of the rotor rotation
among other things.
Here are the obvious points that Robert Adams insisted on;
- Don't use Neo magnets if running under 120 volts.
- Make your drive coils not less than 72 ohms total series
resistance for >= 120 volts. 10+ ohms if running >= 12v. (the higher
the voltage, the better the efficieny).
- Your rotor must be perfectly balanced and as low friction as
possible. Don't expect dramatic results if you put shit together from
crap in your garage.
- Don't bother with systems running on less than 48 volts. The
OU is so small you might miss it.

Here is where you (and I ) went wrong;
- Don't expect OU without generator coils. Adams motor is over
unity in mechanical and NOT electrical means! Don't bother with the
recoil voltage. I know it is fascinating, but that is well known and
it's the basis for buck regulators. Just shunt it to the power source
capacitors with an appropriate schottky diode even when using
MOSFETs. That recovers most of your input energy > 95% but <100% due
to losses.
- Make the area of your generator coil's face, 4 time greater
than your rotor's magnet diameter. i.e. if your magnets are 1" in
diameter, make your gen core 2" in diam.
- Here is the goodie. Draw from the generator coils ONLY at the
appropriate times. My gen coils are 44.7 deg from the drive coils and
I withdraw only from 42 deg to 46.2 deg. That will produce a recoil
when I stop drawing that opposes the magnet providing the second kick
to the rotor's magnets.
- Don't pulse the drive coils until the rotor magnets are in
register with the drive core. You get better rotor speed if you pulse
before the magnets align the register (-7.25 deg) but the OU goes
away.
- I have 2 drive coils and 4 gen coils as per Dr. Adam's specs
for a beginner's system. Since I am just a beginner, I go with that
for now.
- I short out the gen coils into a 2 ohm resistor submerged in
water and measure the water's temp for power output for the initial
eff calculations.

They say that Dr. Adams does not have a real doctorate's degree. It's
an honorary degree from a bullshit university in Sri Lanka.
At this point, I don't care if he got his degree from a bubblegum
machine. He will be a Doctor to me. It worked for me more than all
the phony doctors from all the universities in the world put together.

My strange findings;
- The system (the whole thing) losses weight (weight before
resonance = 4.56 kg, weight at resonance = 4.32 kg). This tells me
that gravity is involved somehow!
- My scopes (2 Tektronix automotive scopes which are used to
voltages in upward of 15kv from spark plugs died completely-channel-
by-channel, my computer about 3 feet away kept resetting or hanging
during testing. All this happened while running at only 12 volts
input!) I put the motor/gen system in a grounded steel-enclosed
compartment and all is well now)

My system runs on PWM unregulated DC converted 120v power line. Input
power is 27.6 watts/hr but the output power is 33.78 kw/h! I charge
12 banks of LA batteries.
I have SOooo much more to learn now that I'm finally on the right
track.
I can't afford to publish my real personal info before the time is
right. However, if u do your own experiments and find useful info not
covered here, do like me and post. I will find it eventually.
Good hunting and screw the $4/gal gas.
I now believe that UFO;s exist and are powered by the same
principles, only light years ahead of us



I dont agree with him about UFO's at all but apart from that he has done a lot of good work and experimenting.

Where does the energy come from????

E=MC^2  means that all matter is pure energy

E = energy
M = mass in grams
C = speed of light in meters squared

You can see form this formula that every gram of matter has a phenominal amount of energy in it but what most 
dont realise is that this energy is being poured into every atom in the Iniverse every instant of every second 
continually.  No imput of energy no matter would exist!!! not even dust noting at all.  So that explains why
there can be an endless supply of power available to us but where does this power come from.
Tom Beardon one of the worlds top Physicists who has studied this for a long time said " No matter how big
 your concept of God,  it is nowhere near big enough.  In 1999 he spent much of that year working on this 
and concluded that for every cubic centimeter of pure copper you would need to combine every power generator in 
the world together for 8.5 mins to have enough power to maintain that 1 CC of copper for 1 instant in time.
1 CC of copper is 5.8 grams of matter or a teaspoonful of matter,  it could be any matter for that fact.
If God stopped pouring the energy into the entire Universe all mastter would cease to exist.  Nothing not even dust.

Regards Russel Prier
